Technical Service Bulletins
|Publication Date: DECEMBER 3, 2001|
Some vehicles may exhibit scratching of the top of the cargo doors by the bottom of the liftgate and the applique attached to the liftgate. This may be caused by the cargo door “jumping” when the liftgate is slammed closed or driving over rough roads.
Door bumpers are being added to the bottom of the liftgate in 2 locations to prevent the liftgate from contacting the top of the cargo doors. Install one each just above each cargo door on the liftgate next to the black applique. Refer to the following Service Procedure for details.
Drill two (2) 5 mm diameter holes into the liftgate 200 mm on both sides of the center of the liftgate in the center of the outer door lip (Figure 1 and Figure 2). Install Door Bumpers part number N805307-S in the two holes using a small blade tip screwdriver.
|PART NUMBER||PART NAME|
OTHER APPLICABLE ARTICLES:
Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
|012407A||Install Protective Bumpers||0.2 Hr.|
|BASIC PART NO.||CONDITION CODE|
Figure 1 – Article 01-24-7
Figure 2 – Article 01-24-7
Copyright © 2001 Ford Motor Company