Technical Service Bulletins
|Publication Date: MARCH 31, 1997|
|1992-1996 BRONCO, F-150, F-250 LD|
1992-1997 F SUPER DUTY, F-250 HD, F-350
The front headlamp housing may melt or distort on some Ambulance and/or Emergency vehicles. This may be caused by the headlamp high beam flashing for signaling purposes in an on-off manner which may build up heat within the headlamp housing.
Replace the headlamp housing with a housing which has a revised material to withstand the higher temperatures generated by the flashing of the headlamps on emergency vehicles. Refer to the appropriate year F-Series/Bronco Service Manual, Section 17-01, for removal and installation procedures.
|NOTE:||THESE PARTS ARE DESIGNED FOR USE IN AMBULANCE AND EMERGENCY VEHICLES WITH FLASHING HEADLAMPS ONLY. NON-EMERGENCY VEHICLES SHOULD CONTINUE TO USE THE F2TZ-13007-B(LH) AND F2TZ-13007-A(RH) ASSEMBLIES WHEN REQUIRED.|
|PART NUMBER||PART NAME|
OTHER APPLICABLE ARTICLES:
Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
|970708AT||Replace Headlamp Assembly – Both Sides (Includes Aiming)||1.0 Hr.|
|970708A||Replace Headlamp Assembly – One Side (Includes Aiming)||0.7 Hr.|
|BASIC PART NO.||CONDITION CODE|
Copyright © 1997 Ford Motor Company