Fulltext TSBs

Technical Service Bulletins

TSB
96-21-17
  • TRANSMISSION – E4OD – UNIQUE OVERDRIVE RING GEAR, ONE-WAY CLUTCH RETAINING RING AND SHAFT RETAINING RING – SERVICE TIP
Publication Date: OCTOBER 7, 1996

LIGHT TRUCK:
1996 BRONCO
1996-1997 ECONOLINE, EXPEDITION, F SUPER DUTY, F-150-350 SERIES

This TSB article is being republished in its entirety to revise the applicable models and years.

ISSUE:

Some 1996 and 1997 vehicles with E4OD transmissions were built with unique overdrive ring gears, one-way clutch retaining ring and center shaft retaining ring (Figure 1).

ACTION:

If service is required on any of these unique transmissions and replacement of either the overdrive ring gear, one-way clutch retaining ring or center shaft retaining ring is required, all three (3) parts must be replaced. Use current level parts for replacement.




Figure 1 – Article 96-21-17


PART NUMBERPART NAME
E9TZ-7A153-AOverdrive Ring Gear
E9TZ-7G375-ARetaining Ring (2 Req’d.)

OTHER APPLICABLE ARTICLES:

NONE

SUPERSEDES:

96-6-11

WARRANTY STATUS:

Information Only

OASIS CODES:

504000


Copyright 1996 Ford Motor Company