|
This publication contains material that is reproduced and distributed under a license from Ford Motor
Company. No further reproduction or distribution of the Ford Motor Company material is allowed without the express written permission of Ford Motor Company.
TSB Main Page
|
|
| TSB
05-26-10 |
- CLUNK OR BUMP WHEN STARTING FROM A STOP
|
| Publication Date: December 21, 2005 |
| FORD: | 1997-2004 F-150
1997-2006 E-Series
1999-2006 F-Super Duty |
This article supersedes TSB 04-26-6 to update the affected model years. ISSUE:
Some 1997-2006 E-Series, 1999-2006 F-Super Duty, 1997-2003 F-150 and 2004 F-150 Heritage 4x2 vehicles may exhibit a driveline clunk or bump that occurs as the vehicle starts to move forward, following a stop. This condition may be caused by the slip yoke not sliding smoothly on the output shaft splines.
ACTION:
Lubricate the slip yoke with Motorcraft PTFE Lubricant. Refer to the following Service Procedure.
SERVICE PROCEDURE
- Verify the condition.
- Remove the driveshaft per Workshop Manual Section 205-01. Be sure to index-mark the driveshaft during removal to maintain alignment during reinstallation.
- Lubricate the slip yoke with 7-13 grams (0.25-0.46 oz.) of Motorcraft PTFE Lubricant.
- Re-index and reinstall the driveshaft per Workshop Manual.
- Verify the repair.
|
....
To access the rest of this feature you must be a logged in Registered User
Of Ford Truck Enthusiasts
Registration is free, easy and gives you access to more features.
If you are not registered, click here
to register.
If you are already registered, you can login here.
If you are already logged in and are seeing this message, your web browser is blocking session
cookies. Change your browser cookie settings to allow session cookies.
