2010 Explorer Specifications




     Overview
     Specifications
    TECHNICAL SPECIFICATIONS

    2010 Explorer Technical Specifications

    BODY
    Construction
    Steel body on fully boxed frame
    Final Assembly Location
    Louisville, Ky. and St. Louis, Mo.
    ENGINE
    Type
    V-6
    V-8
    Manufacturing Location
    Cologne, Germany
    Romeo, Michigan
    Configuration
    Cast-iron block and aluminum head
    Cast-iron block and aluminum heads
    Intake manifold
    Composite, shell welded with internal runner pack
    Composite shell-welded single runner, charge motion control valves
    Exhaust manifold
    Cast iron
    Cast iron
    Crankshaft
    Cast iron
    Cast iron
    Redline
    6,000 rpm
    6,250 rpm
    Idle speed in drive
    625 rpm
    635 rpm
    Throttle body
    65 mm
    75 mm
    Valvetrain
    SOHC, 2 valves per cylinder
    SOHC, 3 valves per cylinder, variable camshaft timing
    Valve diameter
    Intake: 46.0 mm
    Intake: 33.8 mm
      
    Exhaust: 39.0 mm
    Exhaust: 37.5 mm
    Pistons
    Hypereutectic aluminum
    Hypereutectic aluminum
    Connecting rods
    Forged steel
    Cracked powdered metal with floating wristpins
    Ignition
    Distributorless with coil pack
    Coil-on-plug, high-thread-insert spark plugs
    Bore x stroke
    3.95 x 3.32 in. / 100.4 x 84.4 mm
    3.55 x 3.54 in. / 90.2 x 90.0 mm
    Displacement
    245 cu. in. / 4,009 cc
    281 cu. in. / 4,606 cc
    Compression ratio
    9.7:1
    9.8:1
    Horsepower
    210 @ 5,100 rpm
    292 @ 5,700 rpm
    Horsepower per liter
    52.5
    63.5
    Torque
    254 ft.-lb @ 3,700 rpm
    315 ft.-lb. @ 4,000 rpm
    Recommended fuel
    87 octane
    87 octane
    Fuel capacity
    22.5 gallons
    22.5 gallons
    Fuel injection
    Sequential multi-port fuel injection
    Sequential multi-port fuel injection
    Emission control
    Closed loop with catalyst
    Closed loop with catalyst
    Emissions (tailpipe/evaporation)
    Tier II, Bin 4 / ULEV II
    Tier II, Bin 5 / LEV II
    Oil capacity
    5 quarts with filter
    6 quarts with filter
    Recommended oil
    GF-4, 5W-30
    GF-4, 5W-20
    Coolant capacity
    12.5 quarts
    12.7 quarts
    DRIVETRAIN
    Layout
    Rear- or four-wheel drive
    four-wheel drive
    TRANSMISSION
    Standard
    5-speed automatic overdrive
    6-speed automatic overdrive
    Gear Ratios
    1st
    3.22:1
    4.17:1
    2nd
    2.29:1
    2.34:1
    3rd
    1.55:1
    1.52:1
    4th
    1.00:1
    1.14:1
    5th
    0.71:1
    0.87:1
    6th
    N/A
    0.69:1
    REV
    3.07:1
    3.40:1
    Final Drive
    0.71:1
    0.69:1
    REAR AXLE RATIO
    Standard
    3.55
    3.55
    Optional
    3.73
    N/A
    SUSPENSION
    Front
    Independent short- and long-arm (SLA) architecture with coil-over shocks; 32-mm stabilizer bar
    Rear
    Independent trailing blade short- and long-arm (SLA) architecture with coil-over shocks; 25-mm stabilizer bar
    STEERING
    Type
    Low-friction rack and pinion with power assist
    Steering column
    Tilt
    Ratio
    18.9:1
    Turns lock-to-lock
    3.6 turns
    Turning circle curb-to-curb
    36.8 ft
    FUEL ECONOMY (city/hwy)
    4×2 4.0-liter V-6

    5-speed automatic

    14/20
    4×4 4.0-liter V-6

    5-speed automatic
    13/19
    4×4 4.6-liter V-8

    6-speed automatic
    14/19
    BRAKES
    Type
    Four wheel power disc brakes with standard 4 sensor, 4 channel anti lock braking system (ABS) and AdvanceTrac® with RSC® (Roll Stability Control™)
    Front
    12 x 1.2 in. ventilated
    Swept area
    120.9 sq. in.
    Rear
    11.8 x .47 in.
    Swept area
    94.24 sq. in.
    Power assist
    Vacuum
    TIRES AND WHEELS
      
    P235/70R16 A/S OWL tires/ 16 x 7.0 inch painted aluminum wheels

    P245/65R17 A/S  OWL tires/ 17 x 7.5 inch painted aluminum wheels

    P245/65R17 A/T OWL tires/ 17 x 7.5 inch machined aluminum wheels

    P235/65R18 A/S OWL tires/ 18 x 7.5 inch chrome-clad aluminum wheels

    P255/50R20 A/S BSW tires/ 20 x 8.0 inch polished aluminum wheels 

    EXTERIOR  (inches unless otherwise noted)
    Wheelbase
    113.7
    Vehicle length
    193.4
    Vehicle width     

      (excluding mirrors)

    73.7
    Vehicle height (with options)
    72.8
    Track, front/rear
    60.9 / 61.8
    Minimum running ground clearance
     8.3
    Approach angle
    28.2°
    Departure angle
    23.8°
    Ramp breakover angle
    18.4°
    INTERIOR (inches unless otherwise noted)
    Seating capacity
    5, 6 or 7 passenger
    Headroom
    Front row
    39.8
    Second row
    38.7
    Third row
    37.4
    Legroom
    Front row
    42.4
    Second row
    36.9
    Third row
    34.9
    Shoulder room
    Front row
    59.0
    Second row
    58.9
    Third row
    53.1
    Hip room
    Front row
    55.4
    Second row
    55.5
    Third row
    45.3
    Cargo Volume
    5 Passenger
    7 Passenger
    Behind first row
    85.8 cu. ft.
    83.7 cu. ft.
    Behind second row
    45.1 cu. ft.
    43.9 cu. ft.
    Behind third row
      -
    13.6 cu. ft.
    Maximum towing capacity (lbs.) (when properly equipped)
    V-6  
    V-8  
    4X2, 5-Passenger
    5,375
    4X4, AWD 5-Passenger
    5,205
    7,115
    4X2, 6-Passenger
    5,315
    4X4, AWD 6-Passenger
    5,140
    7,050
    4X2, 7-Passenger
    5,290
    4X4, AWD 7-Passenger
    5,115
    7,025
    Maximum payload
    4X2, 5-Passenger
    1,510
    4X4, AWD 5-Passenger
    1,500
    1,500
    4X2, 6-Passenger
    1,450
    4X4, AWD 6-Passenger
    1,440
    1,440
    4X2, 7-Passenger
    1,430
    4X4, AWD 7-Passenger
    1,420
    1,420
    Base curb weight
    4X2, 5-Passenger
    4,455
    4X4, AWD 5-Passenger
    4,628
    4,719
    4X2, 6-Passenger
    4,519
    4X4, AWD 6-Passenger
    4,691
    4,782
    4X2, 7-Passenger
    4,544
    4X4, AWD 7-Passenger
    4,716
    4,807
    Weight distribution (f/r)
    4×2: 53/47
      
    4×4: 54/46
    4×4: 54/46
    Power-to-weight ratio (lbs/hp)
    4×2: 0.0473
    -
      
    4×4: 0.0455
    4×4: 0.0620
    Specifications subject to change.