2010 Expedition Specifications




     Overview
     Specifications
    TECHNICAL SPECIFICATIONS

    2010 Expedition Technical Specifications

             
    Expedition
    EL
    BODY
    Construction
    Steel body on fully boxed frame
    Final assembly location
    Kentucky Truck Plant, Louisville, Kentucky
    POWERTRAIN AND CHASSIS
    ENGINE
    Type
    5.4-liter V-8
    Manufacturing location
    Windsor Engine Plant
    Configuration
    Cast-iron block and aluminum heads
    Intake manifold
    Composite intake
    Exhaust manifold
    Cast-iron swept runner design
    Crankshaft
    Steel
    Redline
    5,400 rpm
    Minimum idle speed in drive
    550 rpm
    Throttle body
    75 mm electronically controlled
    Valvetrain
    SOHC, 3 valves per cylinder, variable camshaft timing
    Valve diameter
    Intake: 33.8 mm; Exhaust: 37.5 mm
    Pistons
    Strutless modified barrel skirt; Hypereutectic aluminum alloy with graphite skirt coating
    Connecting rods
    Powdered metal
    Ignition
    12 volt coil-on-plug system
    Bore x stroke
    3.55 x 4.17 in. / 90.2 x 105.8 mm
    Displacement
    330 cu. in. / 5408 cc
    Compression ratio
    9.8:1
    Horsepower
    310 @ 5,100 rpm
    Horsepower per liter
    55.5
    Torque
    365 ft.-lb. @ 3,600 rpm
    Recommended fuel
    87 octane
    Fuel capacity
    28.0 gallons
    33.5 gallons
    Fuel injection
    Sequential multi-port electronic
    Emission control
    Closed loop with catalyst
    Emissions (tailpipe/evaporation)
    Tier II, Bin 5 / LEV II-ULEV II
    Oil capacity
    7.0 quarts
    Recommended oil
    SAE 5W20
    Coolant capacity
    20.6 quarts; 23.2 quarts with auxiliary AC
    DRIVETRAIN
    Layout
    Rear- or four-wheel drive
    TRANSMISSION
    Standard
    6-speed automatic overdrive
    Gear Ratios
    1st
    4.17:1
    2nd
    2.34:1
    3rd
    1.52:1
    4th
    1.14:1
    5th
    0.87:1
    6th
    0.69:1
    REV
    3.40:1
    REAR AXLE RATIO
    Standard
    3.31
    3.73
    Optional
    3.73
    3.73
    SUSPENSION
    Front
    Independent, double-wishbone, short- and long-arms (SLA) design with coil-over shocks and 36 mm stabilizer bar
    Rear
    Independent, multilink design with coil-over shocks and

    18 mm, 19 mm or 21 mm stabilizer bar
    STEERING
     
    Type
    Low-friction rack and pinion with power assist
    Steering column
    Manual tilt
    Ratio
    20:1
    Turns lock-to-lock
    3.2 turns
    Turning circle curb-to-curb
    40.83 ft
    43.93 ft
    BRAKES
    Type
    Four-wheel power disc brakes with standard 4 sensor, 4 channel anti-lock braking system (ABS) and AdvanceTrac® with RSC® (Roll Stability Control™)
    Front
    343 x 34 mm ventilated
    Swept area
    1,829.6 cm 2
    Rear
    334.5 x 22 mm ventilated
    Swept area
    1,025.6 cm 2
    Power assist
    Vacuum with ABS
    TIRES AND WHEELS
     
    P265/70R17 A/S BSW tires/ 17 x 7.5 inch steel wheels

    P265/70R17 ON/OFF ROAD OWL tires 17 x 8.0 inch aluminum wheels

    P265/70R17 A/S BSW tires/ 17 x 8.0 inch machined aluminum wheels

    P255/70R18 A/S OWL tires/ 18 x 8.5 inch machined aluminum wheels

    P255/70R18 A/S OWL tires/ 18 x 8.5 inch bright machined aluminum wheels

    P275/55R20 A/S BSW tires/ 20 x 8.5 inch chrome-clad aluminum wheels

    DIMENSIONS (inches unless otherwise noted)
    EXTERIOR
    Expedition 4×2/4×4
    Expedition EL 4×2/4×4
    Wheelbase
    119.0
    131.0
    Vehicle length
    206.5
    221.3
    Vehicle width excluding mirrors
    78.8
    78.8
    Vehicle width including mirrors
    91.8
    91.8
    Vehicle width with mirrors folded
    79.7
    79.7
    Vehicle height with options
    77.2
    77.7/78.3
    Track width, front/rear
    67.0/67.2
    67.0/67.2
    Minimum Running Ground clearance
    8.7
    8.7
    Approach angle
    22.8°/22.6°
    23.1°/24.1°
    Departure angle
    21.4°/21.5°
    20.1°/20.9°
    Ramp breakover angle
    18.4°/18.3°
    17.6°/18.7°
    INTERIOR
    Expedition 4×2/4×4
    Expedition EL 4×2/4×4
    Headroom
    Front row
    39.6
    39.5
    Second row
    39.8
    39.7
    Third row
    38.3
    38.0
    Legroom
    Front row
    41.1
    41.1
    Second row
    39.1
    39.1
    Third row
    37.7
    37.7
    Shoulder room
    Front row
    63.2
    63.2
    Second row
    63.7
    63.7
    Third row
    51.9
    67.1
    Hip room
    Front row
    60.2
    60.2
    Second row
    59.9
    59.9
    Third row
    50.2
    51.8
    WEIGHTS AND CAPACITIES (pounds unless otherwise noted)
    Cargo Volume
    Expedition
    Expedition EL
    Behind first row
    108.3 cu. ft.
    130.8 cu. ft.
    Behind second row
    55.0 cu. ft.
    85.5 cu. ft.
    Behind third row
    18.6 cu. ft.
    42.6 cu. ft.
    Maximum towing capacity (when properly equipped)
    4X2
    9,200
    8,900
    4X4
    9,000
    8,700
    Maximum payload
    4X2
    1,670
    1,620
    4X4
    1,640
    1,570
    Base curb weight
    4X2
    5,569
    5,854
    4X4
    5,801
    6,088
    Weight distribution (f/r)
    4X2
    49.6/50.4
    49.4/50.6
    4X4
    51.1/48.9
    51.0/49.0
    FUEL ECONOMY(city/hwy)
    4×2, 5.4-liter V-8 (non EL)
    14/20
     N/A
    4×4, 5.4-liter V-8 
    N/A
     N/A
    Specifications subject to change.