2010 Edge Specifications Overview Specifications TECHNICAL SPECIFICATIONS 2010 Edge Technical Specifications V-6 BODY Construction Unibody Final Assembly Location Oakville Assembly Complex; Oakville, Ontario POWERTRAIN AND CHASSIS ENGINE Type 3.5-liter DOHC 24-valve V-6 Manufacturing location Lima Engine Plant, Ohio Configuration 60 degree V-6, aluminum block and heads Intake manifold Composite, split plenum Exhaust manifold Cast iron Crankshaft Forged steel Redline 6,700 rpm Idle speed in drive 620 rpm (640 with trailer tow package) Throttle body 65mm, electronic Valvetrain DAMB, 4 valves per cylinder, intake variable camshaft timing Valve diameter Intake: 37mm; Exhaust: 31mm Pistons High-temperature cast-aluminum alloy with low-friction coated skirts, low- tension rings Connecting rods Cracked powder metal Ignition Pencil coil Bore x stroke 3.6 x 3.4 in/ 92.5 x 86.7 mm Displacement 213 cu in/ 3,496 cc Compression ratio 10.3:1 Horsepower 265 @ 6,250 rpm Horsepower per liter 71.5 Torque 250 ft.-lb. @ 4,500 rpm Recommended fuel 87 octane Fuel capacity 19 gallons FWD, 20 gallons AWD Fuel injection Sequential multi-port fuel injection Emission control Closed loop with catalyst Emissions (tailpipe/evaporation) Federal standards Fed: Tier II/Bin5, LEV II California standards Calif : ULEV II Oil Capacity 5.5 quarts, with filter Recommended Oil GF4, 5W-20 DRIVETRAIN Layout FWD (Optional AWD) TRANSMISSION Standard 6-Speed automatic Gear Ratios 1st 4.48:1 2nd 2.87:1 3rd 1.84:1 4th 1.41:1 5th 1.0:1 6th 0.74:1 REV 2.88:1 Final drive FWD: 3.16; AWD: 3.39 SUSPENSION Front MacPherson strut and L-shaped lower control arm with isolated subframe and stabilizer bar Rear Independent suspension with trailing blade, integrated knuckle and lateral links, isolated subframe and stabilizer bar STEERING Type Power rack and pinion Steering column Tilt-telescope Ratio 17.7:1 Turns lock-to-lock 3.1 Turning circle curb-to-curb 11.74 m (38.6 ft) BRAKES Type 4-wheel ABS (4 channel); AdvanceTrac® with RSC® (Roll Stability Control) Front Disc Swept area FWD: 63.1 sq. in.; AWD: 69.79 sq. in. Rear Disc Swept area 50.38 sq. in. Power assist Yes TIRES AND WHEELS P235/65R17 all-season BSW on 17×7.5-inch painted aluminum P245/60R18 all-season BSW on 18×7.5-inch painted aluminum P245/60R18 all-season BSW on 18×7.5-inch premium aluminum chrome-clad P245/50R20 all-season BSW on 20×7.5-inch premium chrome-clad P265/40R22 all-season BSW on 22×9-inch bright polished aluminum P245/50R20 all-season BSW on 20×7.5-inch premium chrome-clad DIMENSIONS (inches unless otherwise noted) EXTERIOR Wheelbase 111.2 Vehicle length 185.7 Vehicle width 75.8 excluding mirrors; 87.5 including mirrors Vehicle height 67.0 (without options); 69.0 (with options) Track front/rear 65.4/64.7 Minimum running ground clearance 7.9 Approach angle 16.5° Departure angle 26.6° Ramp breakover angle 17.2° Cargo volume behind front row 69.0 cu. ft. Cargo volume behind second row 32.2 cu. ft. INTERIOR Seating capacity 5 passenger Headroom Front row 40.0 Second row 39.3 Legroom Front row 40.7 Second row 39.6 Shoulder room Front row 58.9 Second row 58.8 Hip room Front row 54.8 Second row 56.3 WEIGHTS AND CAPACITIES (pounds unless otherwise noted) Maximum towing capacity (when properly equipped) 3,500 (Class II ) Maximum payload (when properly equipped, including 150 lb. driver) FWD 1,077 AWD 1,058 Base curb weight FWD 4,078 AWD 4,288 Weight distribution (f/r) 60/40 FUEL ECONOMY (city/hwy) FWD 3.5-liter V-6 18/25 AWD 3.5-liter V-6 17/23 Specifications subject to change.