| Recall data for: 1993 FORD B700 |
| NHTSA Campaign Number: 92V164000 |
| Manufacturer Campaign Number: |
| Make: FORD |
| Model: B700 |
| Year: 1993 |
Component:
WHEELS |
| Manufacturers Involved: FORD MOTOR COMPANY |
| Begin Date Of Manufacturing: 19920901 |
| End Date Of Manufacturing: 19920901 |
| Recall Type: V |
| Potential Number Of Units Affected: 192 |
| Date Owner Notified By Manufacturer: 19930205 |
| Recall Initiator: MFR |
| Manufacturer Responsible For Recall: FORD MOTOR COMPANY |
| Date Report Received By ODI: 19921110 |
| Date Added To File: 19921127 |
| Regulation Part Number: |
| Federal Motor Vehicle Safety Standard Number: |
Defect Summary:
|
Consequence Summary:
USING THE WRONG SIZED CLAMPS TO ATTACH THE RIM AND TIREASSEMBLY TO THE WHEEL SPOKES COULD CAUSE THE STUDS THAT ATTACH THE CLAMPS TO THESPOKES TO BEND. IF THE STUDS ARE BENT, THERE IS AN INCREASED RISK OF STUDFRACTURE THAT COULD RESULT IN THE RIM AND TIRE ASSEMBLY BREAKING FROM THEWHEEL. |
Corrective Action:
REPLACE THE CLAMPS AND STUDS ON THE CAST SPOKE WHEELS. |
