My first attempt at uploading a picture here

 

Here's my latest purchase I'm trying to return to service; 2000 F250 6.8 V10. Found the replacement body parts local. Removed the damaged parts and to my surprise the front frame horns are both bent toward the passenger side a bit. I can't find any detailed measurements of the frame. Was hoping someone might have a picture of a non-wrecked front end with the grill and bumper removed, maybe of a conversion to a later model front end? Would help me to get my bent horns back close to shape. The bumper has slotted mounting holes so they don't have to be exact.






Thanks in advance!

 

Removed a little more than the bumper for you . Hope this helps.

 

Yes it does - thanks! Would you mind taking a measurement from the outside to the outside of the 2 frame horns?

 

Not easy to get a good measurement there. that's an old pic and there's snow on the ground. I got a measurement of 33 3/4 clear between the tow hooks though.