Part Number Help - Sheetmetal
#1
Part Number Help - Sheetmetal
So, I am the accidential new owner of a NOS lower fender that was described as for the 48-50 model year. This appears to me to be for an F7 or larger truck. The pre Zip Code transfer tag shows a part number: 7Q 16433. Can a member with a reference advise me exactly what I might have here?
Many thanks in advance.
Many thanks in advance.
#5
Absolutely! And I will slam it to the ground with my vintage air ride kit (you'll note the air valve to fill the rubber cylinder - very sexy):
After it sits on the ground awhile, I'll bring it back to run height with my new jack (It looks like the 49 version that was only made for a few months, correct me here).
Life will be good.
After it sits on the ground awhile, I'll bring it back to run height with my new jack (It looks like the 49 version that was only made for a few months, correct me here).
Life will be good.
Thread
Thread Starter
Forum
Replies
Last Post
bmarkline
1973 - 1979 F-100 & Larger F-Series Trucks
130
04-25-2018 06:56 AM
Mikestrucks
1948 - 1956 F1, F100 & Larger F-Series Trucks
5
03-23-2007 10:34 AM