1951-52 truck parts
#1
1951-52 truck parts
Category: Exterior - Body Parts
Price: $0
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): CRX & pre '92 Civic
Item Condition: WA
Engine: Part suitable for gas truck
I've got a pretty good pair of F2-6 front fenders, a nice cab back, a cowl vent opening section and a lower left windshield opening section from the grey truck in the 4th picture if yours is rusted out. Lots of miscellaneous stuff.
There's a near perfect pair of 1951 F-6 hood side trim mouldings in my stash. Still have a lot of 254 flathead 6 engine parts, many interchange with the 226. Two 6 cylinder battery trays, an oil filter, an oil bath air filter, distributors, heads, side covers, and lots more. Let me know what you might need, I probably have it.
Please contact via private message. I don't get reply notices from this thread and may not get your message otherwise. Thanks.
#2
Join Date: Nov 2010
Location: Raleigh, North Carolina
Posts: 20
Received 0 Likes
on
0 Posts
Interested in the Cab
52 Merc,
Is it safe to assume the cab is still available?
Steven
Is it safe to assume the cab is still available?
Steven
Last edited by segeorge982; 01-11-2012 at 08:55 AM. Reason: Deleted, saw instructions about private message.
#3
Yes, Steven, the cab is still available.
#5
You're welcome to come out and visit. I'll even help you load it.
#6
226/254 intake manifold
Hi, I'm interested in the intake manifold if ya still have it, as long as the exhaust heat passage isn't rotted through. Let me know what ya need for it.
Thanks, Dave
Thanks, Dave
Trending Topics
#8
Still lots of good stuff laying around taking up valuable real estate. PM me with needs, wants and desires!
#10
I need a 3 speed light duty open drive transmission for my 1950 ford F1. Do you have one available? Email me at forrbw@aol.com. Thanks, Bill
#11
I need a 3 speed light duty open drive transmission for my 1950 ford F1. Do you have one available? Email me at forrbw@aol.com. Thanks, Bill
#13
Both trucks came with the T98 Syncro-silent 4 speed transmission. I sold one and the other was junk.
did you get my email regarding the other parts you asked about? I sent pictures.
did you get my email regarding the other parts you asked about? I sent pictures.
#15
Didn't get the email....?
Did you junk the bad Synchro? I just picked one but it needs the usual, snap rings and rollers. Shift hat is all rusted solid too, so I need one of those.
Anyhow, still hunting for not over-bored rear drums and a good pitman arm.
I ended up picking up a better truck to make one good out of two, so less parts hunting