no start problems

[bismic]

Originally Posted by duckbuster38401 is it possible to rebuild the HPOP is there a kit? thanks not that I have ever seen or heard of.

[duckbuster38401]

I pulled the pump off tonight and I cannot feel it building any vaccum orpumping air out. thanks

[duckbuster38401]

Where is the best place to get a new pump, IPR and ICP? Is there a seal/gasket kit that I can get that has all I need? Thanks

[bismic]

matty169 has a low-mile 2003 HPOP. Depending on your build date, it may work. Matt would know.

Lots of places for sensors and aftermarket parts. What is your engine build date? The International dealership is a very reasonably priced option, but you have to have the International part #.

Cheap OEM Parts http://www.powerstrokeshop.com/

http://www.discountfordpartsaty2kford.com/ http://www.trademotion.com/partlocator/index.cfm?siteid=214072 http://www.partsguyed.com http://www.newfordparts.com/ http://www.directfordparts.com/partlocator/index.cfm?siteid=214290 http://fullerfordparts.com/default.aspx http://usdieselparts.com/category.cfm?category=143 http://stillen.com/ http://www.car-parts.com/ http://www.trademotion.com/partlocator/index.cfm?siteid=215005 __________________ Mark 06 F250 CC SB ESOF FX4 Lariat 3.73LS 275/65R20; DieselSite Coolant Filter; High Idle Mod; HFCM Plug; Zoodad/Air Fury grill; Accufab Elbow; RACCCV6000 filter; JimmiJammers; Ravelco; SynchroMax in Transfer Case; Fumoto Valve; Harpooned fuel tank; Line-X; CPOhighway Products tool box; tracrac; Fox Weatherboots; Wet Okole Seat Covers; Stanadyne Performance & B2 for lubricity; PIE adapter (thanks Sarge); PIAA 24" wiper blades; updated EGR valve; BriteBox; Re-flashed; Fuel Pressure gauge; DashDaq on deck

bismic

View Public Profile

View Gallery

Find all posts by bismic

[bismic]

I am fairly sure these are your part numbers:

..............................International #.........Ford #

2003 / 2004 HPOP:

5010106R93

4C3Z-9A543-AARM

03 ICP

1845274C92

3C3Z-9F838-EA

not sure right now on the IPR part numbers.

IIRC:
the ICP will be about $150
the IPR will be about $250

Matt's HPOP (post #52):
http://www.ford-trucks.com/forums/88...st-died-2.html

[y2kfordparts]

Originally Posted by duckbuster38401

Where is the best place to get a new pump, IPR and ICP? Is there a seal/gasket kit that I can get that has all I need? Thanks

ME ME ME ME ME

LOL



HPOP before 9/22/03 3C3Z9A543AARM

HPOP after 9/22/03 4C3Z9A543AARM

there is more misc info in catalog so order with vin to be sure.


I dont have the typing skills and catalog wont let me copy and paste. to many little details to determine which parts are needed for 03/04

need vin to narrow it down or it's just a guessing game.


Ed

[duckbuster38401]

I am going to try t owork on it again tomorrow my week has been so busy I have not been able to work on it any more. VIN# 1FTNW21P24ED30890 thanks

[y2kfordparts]

ok, confirmed 4C3Z9A543AARM is correct HPOP


4C3Z9F838AB ICP SENSOR

3C3Z9C968AA IPR REGULATOR


Ed

[bismic]

Originally Posted by y2kfordparts

ok, confirmed 4C3Z9A543AARM is correct HPOP


4C3Z9F838AB ICP SENSOR

3C3Z9C968AA IPR REGULATOR


Ed

Ed - are you sure of the ICP number? My list has the HPOP and IPR as you have listed, but the ICP is different. Mine could be wrong, but thought I would just ask since your HPOP and the IPR numbers match the early 04's and your ICP number matches the later 04's (at least on my list).

[y2kfordparts]

Originally Posted by bismic

Ed - are you sure of the ICP number? My list has the HPOP and IPR as you have listed, but the ICP is different. Mine could be wrong, but thought I would just ask since your HPOP and the IPR numbers match the early 04's and your ICP number matches the later 04's (at least on my list).

for his vin number and production date yes.


ed

and I went on line with Ford and used vech build sheet parts list. cause the catalog ask way to many question I was not able to get from the vin and I was not speaking with cust on phone to ask or find out answers.

[bismic]

Originally Posted by y2kfordparts

for his vin number and production date yes.


ed

and I went on line with Ford and used vech build sheet parts list. cause the catalog ask way to many question I was not able to get from the vin and I was not speaking with cust on phone to ask or find out answers.

Good deal Ed!

[y2kfordparts]

Originally Posted by bismic

Good deal Ed!

I try!