Quick fog lamp question

[criscoe619]

Dont have fog lamps on my s*** box and I was just wondering on what had to be done to make them work What I have bought 1. Both fog lights 2. Headlight switch w/ fog light option Now is there a relay or fuse or somehing to make them work. The harness is there but im really sure is not just a plug and play thing. Thanks.

[bnovak]

On the schematic, there is a 5A fuse (in the fuse / relay box) and there is also a relay closer to the lamps.

The fuse should be in the passenger compartment fuse panel, and the relay should be in the relay / fuse block in the engine compartment.

Worse comes to worse, plug in the switch and fuse, and turn it on - check it with a VOM and see if you get power at the harness.

Which foglights did you use? I'm thinking of swapping mine for projectors, but I want to know how they look.

[criscoe619]

Any idea were that fuse is located (ex. third row third one down)

On those projectors WOWSERS thats some real taiwanese crap (no offence)

[bnovak]

relay is position 9 and needs a 15A relay if there isn't one in there. looking at the box, its on the low-right side where the bank turns to 2 wide fuses - second one IN from the left.

It's odd though - the FSM says relay + fuse, but the owners manual just says high current fuse.

[criscoe619]

Thanks. It does look like it was plug and play or somewere down the line it had fog lights. Now I hope HID yellow is not a fix it ticket cause people already hate my HID's

[bnovak]

Glad it worked.

My guess is that these things only get one wiring harness, and then it's just plugging in options on the light and switch end.