Hi Guys
Change my filter today, very easy
The large filter is a spin off filter carrier with the filter element in it, drain the filter in a pail takes about 5 minutes to do that, use a 1 1/4 in socket to turn it off, change the element and big O ring and spin it back on, it has a "stop" so you can't go wrong turning it in.
The top filter is as easy, lossen a 7 mil nut that holds the filter tight, the green keeper on the left line goes ina downward direction, just pinch it and it moves down, the right one has a white push tab, push it down with your finger or use a screw driver, then grab the line and move the fuel line towards the filter and and then pull back and it will release. There is a bit of fuel spilled so place some paper towel under the lines prior to removing the lines.
The lines go back on as easy.
Cycle the key a few times to refill the filters.
I would do this with a cool motor.
This is not ment to be a tutorial, but just to show how easy it can be.
Any ways guys this was my first time and I did it without incident