Im getting ready to start working on my 49 f3. Its going to be a driver (not racer) just jump in anytime and drive. its going to have a 1980 351w with either a c4 or c6 not sure that yet. im looking at trying to keep close to the same ride height. im looking at converting the front to discs with the speedway kit. planing on running the 5 on 4.5 pattern. il have full moons so the pattern wont be seen. for the rear i either have a '86 ranger axle or i have a '79 cougar 9". the cougar is still a complete car and im parting out the ranger so im thinking on using that. any commets on this build.
also i was wandering is there a adapter kit to put a grant steering wheel on the stock steering colum
a few pics