Originally Posted by
TXSailor
<TABLE dir=ltr border=0 cellSpacing=0 cellPadding=2 width=359><TBODY><TR><TD height=19 width="62%" colSpan=3>Ford Harness connector
</TD><TD height=19 width="19%">
</TD><TD height=19 width="19%">Use
</TD></TR><TR><TD height=19 width="19%">
</TD><TD height=19 width="23%">
</TD><TD height=19 width="19%">
</TD><TD height=19 width="19%">
</TD><TD height=19 width="19%">
</TD></TR><TR><TD height=19 width="19%">Pin
</TD><TD height=19 width="23%">Color
</TD><TD height=19 width="19%">ID
</TD><TD height=19 width="19%">
</TD><TD height=19 width="19%">
</TD></TR><TR><TD height=19 width="19%">
</TD><TD height=19 width="23%">
</TD><TD height=19 width="19%">
</TD><TD height=19 width="19%">
</TD><TD height=19 width="19%">
</TD></TR><TR><TD height=19 width="19%">1
</TD><TD height=19 width="23%">Lt Blu/Red
</TD><TD height=19 width="19%">19
</TD><TD height=19 width="19%">
</TD><TD height=19 width="19%">Illuination
</TD></TR><TR><TD height=19 width="19%">2
</TD><TD height=19 width="23%">BLK
</TD><TD height=19 width="19%">57
</TD><TD height=19 width="19%">
</TD><TD height=19 width="19%">Ground
</TD></TR><TR><TD height=19 width="19%">3
</TD><TD height=19 width="23%">Red/Blk
</TD><TD height=19 width="19%">1000
</TD><TD height=19 width="19%">
</TD><TD height=19 width="19%">Ignition
</TD></TR><TR><TD height=19 width="19%">4
</TD><TD height=19 width="23%">
</TD><TD height=19 width="19%">
</TD><TD height=19 width="19%">
</TD><TD height=19 width="19%">blank
</TD></TR><TR><TD height=19 width="19%">5
</TD><TD height=19 width="23%">Org/Red
</TD><TD height=19 width="19%">802
</TD><TD height=19 width="19%">
</TD><TD height=19 width="19%">RR Speaker
</TD></TR><TR><TD height=19 width="19%">6
</TD><TD height=19 width="23%">Brn/Pnk
</TD><TD height=19 width="19%">803
</TD><TD height=19 width="19%">
</TD><TD height=19 width="19%">RR Speaker
</TD></TR><TR><TD height=19 width="19%">7
</TD><TD height=19 width="23%">Wht/Lt Grn
</TD><TD height=19 width="19%">805
</TD><TD height=19 width="19%">
</TD><TD height=19 width="19%">RF Speaker
</TD></TR><TR><TD height=19 width="19%">8
</TD><TD height=19 width="23%">Dk Grn/Org
</TD><TD height=19 width="19%">811
</TD><TD height=19 width="19%">
</TD><TD height=19 width="19%">RF Speaker
</TD></TR><TR><TD height=19 width="19%">9
</TD><TD height=19 width="23%">Lt Grn/Vio
</TD><TD height=19 width="19%">797
</TD><TD height=19 width="19%">
</TD><TD height=19 width="19%">Power
</TD></TR><TR><TD height=19 width="19%">10
</TD><TD height=19 width="23%">Blk/Pnl
</TD><TD height=19 width="19%">194
</TD><TD height=19 width="19%">
</TD><TD height=19 width="19%">Ignition
</TD></TR><TR><TD height=19 width="19%">11
</TD><TD height=19 width="23%">Blk/Lt Grn
</TD><TD height=19 width="19%">694
</TD><TD height=19 width="19%">
</TD><TD height=19 width="19%">Ground
</TD></TR><TR><TD height=19 width="19%">12
</TD><TD height=19 width="23%">Gry/Lt Blu
</TD><TD height=19 width="19%">800
</TD><TD height=19 width="19%">
</TD><TD height=19 width="19%">LR Speaker
</TD></TR><TR><TD height=19 width="19%">13
</TD><TD height=19 width="23%">Tan/Yel
</TD><TD height=19 width="19%">801
</TD><TD height=19 width="19%">
</TD><TD height=19 width="19%">LR Speaker
</TD></TR><TR><TD height=19 width="19%">14
</TD><TD height=19 width="23%">Org/Lt Grn
</TD><TD height=19 width="19%">804
</TD><TD height=19 width="19%">
</TD><TD height=19 width="19%">LF Speaker
</TD></TR><TR><TD height=19 width="19%">15
</TD><TD height=19 width="23%">Lt Blu/Wht
</TD><TD height=19 width="19%">813
</TD><TD height=19 width="19%">
</TD><TD height=19 width="19%">LF Speaker
</TD></TR><TR><TD height=19 width="19%">16
</TD><TD height=19 width="23%">Blk/Lt Grn
</TD><TD height=19 width="19%">694
</TD><TD height=19 width="19%">
</TD><TD height=19 width="19%">Ground
</TD></TR></TBODY></TABLE>
Just leave your RICP (Rear Console Control Panel) plugged in and you may be ok for the Rear speakers. Worse case is some jumpers in the connector of the RICP. Like I said, if you PM me with an e-mial address, I'll send you the wiring diagram.
BTW - The speaker wires are in the Passenger Front Foot well (Right side) and not the Drivers side.
As far as the Steering Wheel controls, Pin 14 of the 20 pin Ford connector ( that plugs into the back of the Ford CD/Radio) goes to the Steering Wheel Controls. It is a Lt Blue/Red wire. Connect it to Key 1 (Red wire or #9 on your radio diagram. You will probably have to ground the other radio Steering Wheel control wire ( #12 or Key 2). According to the manual on my radio (which showed up yesterday), these may need to be reversed to work.
I did power up my radio and check all the functions and everything works. Just need to mount it in the EX
Dw
TXSailor posted this on a different thread, it is what I used when I did my install of an aftermarket head unit a few weeks ago. I found that it matched my Ex (2002 7.3 Limited) perfectly. There is also an additional plug in the back of your stock head unit, my understanding is that is primarily for the rear audio controls, and steering wheel controls, which I do not believe you have in a 2000. My new head unit did not have the ability to have a separate rear zone, so all I used out of that harness was the Lt Blue/Red wire for the steering wheel controls.