Originally Posted by
Gordon-0
GREAT!!!!!!
you saved me a BUNCH of money on this!
one question:
how does the switch attach to the dash?
can i get it out without taking the dash apart by reaching through the radio hole?
sorry for the thread revival but this may help a lot more people anyway
No, you can't... I wish it was that easy! You have to pull the radio out and undo those to screw on the underside of the top edge of the radio opening. Then you have to pull the bezEl out enough to get a nut driver or ratchet in there to undo the screws that hold the PAS in there (it's two or three... can't remember). Also, undo the harness and then you're set!