Ok so i plan on going back home soon and would like to do some work on the fb, hoses, clean fpr screen and heater element. I have the bad fb heater element which causes fuse 22 to blow so the wire is cut. but i would like to replace the element and do the sd heater element mod to it and would need the new wire for it. does any one know what that connector is so i can get it? thanks

oh kinda on a side note, for those that have dont the fpr shime have most of you used a bb or a tiny bolt with the nut on it? cause i saw both in the write up in travis's write up thread and figured the bolt and nut would work better than the bb. just wondering for future refrence. thanks