View Single Post
  #22  
Old 01-18-2011, 07:47 PM
carnut122's Avatar
carnut122 carnut122 is offline
Posting Guru
 
Join Date: Dec 2008
Location: Waleska, GA
Posts: 2,053
carnut122 is gaining momentum as a positive member of FTE.carnut122 is gaining momentum as a positive member of FTE.
Quote:
Originally Posted by michaelmilburn View Post
I have no idea to be honest, that's why I'm on here to learn am much as the human brain can handle. How would i find this out?

also i need to replace the distributor but all i see are HEI one's, and I've read it generall for 1070-1980 engines, is this ture or can i buy and and drop it in?

Once i place the carb and manifold on I will also replace the fuel filter since it's a cheap part and seems to always be an issue.
I'm not sure of what might work on your motor, but I'd use some sort of electronic ignition and skip the points if it was me. Yep, replace the fule filter so that you can rule it out and chances are it needs to be replace anyway. Like somebody else mentioned, it may be the "bag" filter on the end of your fuel pick-up inside of your tanks that is clogged.
Reply With Quote