Thread: How to bleed
View Single Post
  #2  
Old 01-14-2011, 07:37 AM
senix's Avatar
senix
senix is online now
Super Moderator
Join Date: Aug 2008
Location: Frederick, MD
Posts: 36,588
Received 1,415 Likes on 1,010 Posts
did you cycle the key to just the on position, listen for the fuel pump to come on.

Wait at least 30 seconds then shut key off and repeat.

do this at least 6 times and then it should start.

If not then verify that you have both fuel filters on completely. Be care of the caps. There are torque specs on them.

If that does not work then you could always check the fuel cutoff switch to ensure it it no tripped.