Keep testing that control module. I was having a situation where it would crank and fire and even start, but it wouldn't run for more than a second or two. Just enough to rev it up once. My module tested good...3x. I made the guy hit that button a dozen or more times. FINALLY, it started acting up. Truck did great after a new module. Of course, that was after putting on a high pressure fuel pump, cutting off the cat, and a then a tow home, because after all, the module had tested good!
My gray module was a WELLS.
Last edited by kevin206; 01-05-2011 at 06:56 AM.
Reason: add more