Originally Posted by
penzly
I also have a switch in the glovebox, but the wires are disconnected. Any ideas on what that might be?
No, my 2000 Expi EB 4WD does not have a switch in the glovebox. It has a switch on the firewall, under the glovebox, for the air suspension.
This alarm stuff is all a mystery to me, I'm learning as I go.
With all the different modes and the starter bypass it is difficult to understand without a Service Manual or Installation Manual, which I don't have.
I do have the Owner's Guide which describes the Valet Button blinking lights and the various 'chirps' and I guess I'm lucky to have that. Maybe posting the 8 page OG might help someone, I'll try and figure how to do that.
If I run across something that pertains to this issue I'll post here, sorry I can't be more help.