Originally Posted by
WD401
Did you install this on a new 2011 Super Duty? I have a 2011 Super Duty and there is no wire in pin 18 on the wiring harness on the truck.
No, its an 08 f150. There was a wire for me in pin18, but i did have to move an unused pin into pin19 as i needed a ground through that pin according to the directions. What really helped me identify exactly what pin controls what function on the factory harness was the aftermarket harness i purchased. Each wire on the aftermarket harness has the function printed on the wire itself, and the colors match up perfectly. So if your looking to do a new headunit and you arnt willing to cut the factory harness on the 11' look into the aftermarket harness adapter.