Welcme to FTE

My Ranger bed is about 61" wide by 74" long (measured outside to outside anong the top rails). I have the standard 6' bed. There is also an optional 7' bed only found on regular cab Rangers (like yours).

Do you have a step side bed? Are the wheel wells inside or outside the bed? If outside than you are just about looking for a neadle in a hey stack. There are not many step side bed caps out there. There is one on the NH Craigslist right now though. I don't know where you are located.

Full size truck is about 72" wide. As measured on my '68 F250.

It sounds like you are finding full size truck caps. That makes sence. There are more full size caps out in the used market than mini-truck caps. Yep the Ranger is classified mini-truck.

Keep looking. I have had luck on Craigslist in the past. Try that site for the area you are in. If you do, put ranger in the search. Being you have a '95 some S10, tacoma and nissan (forget there small truck name) caps might fit also. I would definatly do a test fit if they are off a non Ranger truck.

Good luck