If you have or plan on adding an aftermarket intercooler you may need to make some modifications.

I installed the banks intercooler package. I had to drill a hole on intercooler support arm for dieselsite to work. I also couldn't put a filter on because the intercooler pipe by passenger battery is 3.5" and stock is 3". Lol what a difference 1/2" makes. So I cut the diesel site bracket in half on the bottom and then lapped the two pieces. I also had to get a shorter bolt and cut the aluminum sleeve for the bolt down. It was easy to do with good metal blade and jigsaw. It tucked the whole assembly about an inch closer to front of truck. So now the larger filter fits with banks pipes and I can remove filters without disassembling anything. I take a pic later if I remember.

The lapped edges I bolted together with some small bolts and lock washers. Easier to drill a couple holes then drag out the welder. Lol I have no garage and work on driveway.