Thread: 1974 f100 302 ignition points/distributor problems
View Single Post
  #5  
Old 11-10-2010, 07:40 PM
fabmandelux's Avatar
fabmandelux
fabmandelux is offline
Post Fiend
Join Date: Jan 2005
Location: Paradise Found!
Posts: 26,337
Likes: 0
Received 8 Likes on 8 Posts
.032 clearance on the points is waaay to much......Try .016-.017.

Out of adjustment points or out of spec timing will not stop the engine from turning over. That is a separate problem...
 
Reply Like