Used clear headlights and corner lights from Ebay seller parasitesingle. I recommend using the stock adjusters because the ones that come with it aren't very good quality. Lights fit very well.
I'm planning on getting clear LED's for the corner lights but will get around to that later. I'm using Sylvania Xtra Vission bulbs and I'll get night shots later...

Old Lights:


New Lights:


Compare old vs new:


Remove grill/corner/turn/surround pieces:


Remove header panel, two bolts on each end, one at inside bottom corner of headlight, two each side at ends of grill hole, one bottom center (8mm, 11 total)


What it should look like: (corner/bumper attaches here)


What one side looked like:


Fixed the cracked pieces with JB Weld and sheet metal


3 Headlight clips hold it in, remove and then re-install on new lights


Finished!


Much better!