Originally Posted by
Misky6.0
If I leave the key in the "run" position (w/o actually starting the engine) the same sets of sensors stop reporting after about 10 seconds.
* fuel level (and thus all the MPG related gauges)
* intake air temp
* intake air pressure ABS
* MAP sensor
* EGR % error
I'm pretty sure it's a problem with the UG firmware, vs. my ODBII.
I just wanted to here from someone that these things work using
something else before I go and buy another gauge setup.
I don't use EGR% error or Intake ABS sensor, so I can't say one way or the other on those.
I use Fuel Level % all the time on the DashDAQ without issue. I haven't used the last two in the longest time though.