View Single Post
  #9  
Old 10-12-2010, 09:00 AM
danr1's Avatar
danr1
danr1 is offline
Lead Driver
Join Date: Aug 2006
Location: Sand Lake, MI
Posts: 5,670
Received 10 Likes on 10 Posts
Originally Posted by 1978fordf250
When you turn the turn signal lever to one side or another when the lights come on they are bright and stay bright on. Just as bright as they should be. I yanked out my flasher out of my truck I drive everyday and tried its flasher along with 3 others and same thing.

when I say I am getting juice to both sides of the flasher how I tested that is.
I took the flasher out. Then I turned my turn signal lever on to either side. Then I checked both wiring terminals with the flasher out. Whenever I did I Noticed both wires coming to the flasher was "hot" and both have juice.

Ok based on that take out the hazard flasher or fuse #1, turn signals should flash normally.

Test the theory, let us know what happens.