Thread: No spark/start.
View Single Post
  #2  
Old 10-06-2010, 03:37 PM
Franklin2's Avatar
Franklin2
Franklin2 is offline
Moderator
Join Date: Jan 2001
Location: Virginia
Posts: 53,620
Likes: 0
Received 1,676 Likes on 1,355 Posts
When measuring between the dist connector and the dist base-no readings.
Is this the black ground wire? If so, it should be connected to the base inside the dist, I would check it.

Do you have voltage on the coil + when you put the key in run?
 
Reply Like