I just dropped my old 360/np435 in today. The tranny was tough getting on but i believe it is on right. I had to back off the nuts on the rod for the clutch linkage and realized when i put the rod back on i couldnt see how far i had to go becuase the rod was blocking my view. Right now the tranny seems stuck in gear and i cant get it out. I started it up and i could start to get it to move but only way at the top of the pedal. My question is which way do i need to adjust the nuts to get my rod right? This might be hard to understand but just ask and i can try to clear it up. Thanks