Thread: need help / new kingpin kit / no instructions / pic for reference
View Single Post
  #8  
Old 09-10-2010, 01:08 PM
Julies Cool F1's Avatar
Julies Cool F1
Julies Cool F1 is offline
Post Fiend
Join Date: May 2008
Location: Poway, Ca.
Posts: 7,641
Likes: 0
Received 13 Likes on 13 Posts
Just a couple of caviats that you may not pick up on in the pictures.

The Spindle Bolt Thrust Bearing (P/N#3123) has two surfaces - one is flat and the other has the bearing case sides rolled up and over to from the other surface. If you look at it you will see what I mean.

Anyway, the flat surface goes DOWN.

Name: D King Pin and Spindle Replacement 2.jpg Views: 23218 Size: 102.7 KB

Name: D King Pin and Spindle Replacement 1.JPG Views: 30686 Size: 130.2 KB

Your all welcome btw - good luck!
 
Reply Like