Originally Posted by
1997 F-150
I have searched the web, my Haynes manual, the threads on this website,and Im starting to wonder if it would be easier just replacing the whole dang door.
The window motor has twice stopped working for some mysterious reason on the driver side and within the same day started working. I thought maybe a lose connection or bad ground. Recently it rolled down and will not go back up. It only makes a faint clicking noise at motor when pushing the up position on the switch. Pushing the down position on the switch causes a clicking noise at the fuse. The fuse has been replaced and I have wiggled and tightened all connections. I currently have the panel off of the door and cant get to the motor. Any suggestions?
should be a couple if dimples in the metal on the door inner skin
you have to drill em out-very carefully so you can get to the bolts
I used like a 1/2 drill bit and drilled really slow
or at least that's how it is on 94s