Originally Posted by
joerope
oK! back at the PC with another sad story..I found the relay(fuel pump) laying on the chassis inserted it and the pump started humming
Are you saying that the fuel pumps are running all the time the key is on?
Originally Posted by
joerope
BUT I put my fuel pump gauge on the strader valve and no fuel pressure.now is that because the high pressure pump is not working?
What was humming?
Originally Posted by
joerope
i took a pin and pressed down the fuel valve and fuel came out not with force but came out.I took aloose a fuel injector connect and put in a noid light , the Noid light was flashing when i turned over the motorI reconnected the injector and attempted to start it..it was trying to run but died out..and the plugs were wet again..now getting back to that High pressure pump.could that be my problem?
Try unplugging the computer.
Ground pin #6 of the red EEC self-test plug at the NEG post of the battery.
Put the fuel pressure gauge on the test port on the fuel rail.
Tun on the key.
What pressure do you have now?
Turn the key off, is the pressure holding?
/