Ford Truck Enthusiasts Forums - View Single Post - What did you do to the X today?
View Single Post
  #1  
Old 08-07-2010, 06:19 PM
Snowseeker's Avatar
Snowseeker Snowseeker is offline
Post Fiend
 
Join Date: May 2005
Location: Stevens Point, WI
Posts: 11,203
Snowseeker has a superb reputationSnowseeker has a superb reputationSnowseeker has a superb reputationSnowseeker has a superb reputationSnowseeker has a superb reputationSnowseeker has a superb reputationSnowseeker has a superb reputationSnowseeker has a superb reputationSnowseeker has a superb reputationSnowseeker has a superb reputationSnowseeker has a superb reputation
What did you do to the X today?

I did the intake heater element delete today. Couldn't find a plug so I made one. The plug if you are wondering is metric, M22 1.5mm thread pitch. I used blue loctite only when installing the plug in the intake.

Pics for your pleasure.

Click the image to open in full size.

Everything that comes out with the heater:
Click the image to open in full size.

Click the image to open in full size.

Turning metal:
Click the image to open in full size.

Threaded:
Click the image to open in full size.

Milling the flats for the hex, at first I was only going to put two flats on it but I figured that wouldn't be good enough for you guys so I did the hex and messed it up. lol
Click the image to open in full size.

Click the image to open in full size.

There it is:
Click the image to open in full size.

Click the image to open in full size.

See the hex isn't right because I did it quick and just eyeballed it.
Click the image to open in full size.
__________________
http://www.ford-trucks.com/forums/image.php?type=sigpic&userid=272341&dateline=1327366346
03 7.3 EB
04 6.0 XLT Studs, stealth egr delete, and Stuff 'Chitty' - Sold.
00 V10 Limited 'Chitty Deuce'
https://www.facebook.com/pages/VPT/244788508917829
Reply With Quote