Here is the solution to the headrest problem..
Tools required
2 people
2 pieces of cardboard
one small piece of plywood
one 2ft length of square or round pipe just big enough to fit over headrest pole
Instructions
1. Remove headrests
2. place one piece of cardboard on the ground
4. place headrest on cardboard
5. cover head rest with second piece of card board
6. place plywood on top of headrest
7. have one person kneel on the plywood to hold the headrest in place
8. have the other person slide the pipe over the pole and bend it down about 1/2" or as desired
9. reinstall head rest and enjoy your 2010 expedition