View Single Post
  #12  
Old 06-26-2010, 08:28 PM
WorkVan58 WorkVan58 is offline
Freshman User
 
Join Date: Aug 2005
Posts: 25
WorkVan58 is starting off with a positive reputation.
Quote:
Originally Posted by 70f100longbed View Post
None of the pistons will be at TDC if the marks are lined up right. The only thing that matters is the marks you put on the chains line up with the cam and crank marks.
A big +1 on this. The crank positioning tool (which cost $80) is not even needed as long as you line up the marks on the timing chains.
Reply With Quote