I then started the rebuild process. First i refinished the frame and iner fenders. Its a little dusty in this pic.


After the old rustolium paint was sanded off and the frame was refinished, I bedlinered the underside of the bed and reinstalled it. I wanted to get everything mounted on the truck before I started to do some bondo work.



Then I started spraying some primer.





Here is a close up of the cab corner I had to reshape. It was dented in right on the body line and wasn't matching up with the door so I tried to fix it with bondo, its filled in pretty good just needs some more sanding.



This is current. I now need to block sand it down, and try to smooth it out some more. I don't know if I am going to try and paint it or have someone else do it. Also I still need to figure out whats up with my motor, I might just have it rebuilt if I can find someone local that does good work since I pretty much have all the parts. I am going on vacation all next week so there wont be any updates for a while. Let me know what you think.