Up for sale is a fully built long block engine for any year 7.3 powerstroke. I built this last summer and have only about 8000 miles on it. Intended to push my truck into the 11's and some lifestyle changes have came and now i am selling all my go fast parts. Here are the mods:

Hardblok filled water jackets to 2" from deck surface
fire ring grooves cut in the block
main girdle and studs by Wide Open
Crower connecting rods
Mahle pistons .030" lowered to 15:1 by bowl work, teflon and ceramic coated, total seal rings
Polydyn coated main and rod bearings
Balanced rotating assembly
WOP fire ring headgaskets
Melling oil pump
ATI harmonic damper (its off right now, being rebuilt at ATI)
Ported heads (i spent several several hours on these) with inconel exhaust valves, bronze guides, valve job and some crazy stiff ~145lb seat pressure springs
Smith bros pushrods
H-11 head studs
Beans billet intake plenums
ATS billet flexplate
Powdercoated valve covers, new gaskets
Small things such as welded cam gear, welded oil jets, welded and circumsized oil pickup tube
Line x oil pan