Originally Posted by
Reginald56
I have read alot about using the front clip out of a Crown Vic in my 56 f100 but can not find a straight answer to my most important question.
What is the the track width from the front of the hub to front of the other side hub? (Ie where the back of the rim would mount)
This is from measurements taken from an '05 Crown Vic. as close as I could measure.
Track width with stock wheels - 63 1/2
Hub to hub surface - 67 1/2
Outside of tire - 71 1/4
The '02 and earlier which are sometimes used as a complete clip are different.
These measurements are from a '98 Crown Vic.
Track - 63
Hub to Hub - 63 1/4
Overall - 72
These measurements are from my '59 F-100
Track - 63
Hub to Hub - 62 1/2
Overall -69
You didn't state what year you were inquireing about.