Thread
:
Leer "T" Handle Locked/Jammed
View Single Post
#
2
05-29-2010, 07:21 PM
Lady Fitzgerald
Mountain Pass
Join Date: May 2010
Location: AZ, SSA
Posts: 241
Likes: 0
Received 1 Like on
1 Post
A slide hammer puller with a screw tip (designed for pulling body dents) often will pull out the cylinder. I would try that before drilling. After pulling the cylinder, a large wrench on the t-handle may be needed to persuade the latch to open.
Reply
Like
Lady Fitzgerald
View Public Profile
Find all posts by Lady Fitzgerald