Thread: 460 Compression Ratio
View Single Post
  #8  
Old 05-12-2010, 05:58 PM
art015's Avatar
art015
art015 is offline
Mountain Pass
Join Date: Jan 2001
Location: Cullman, Alabama
Posts: 108
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by cadunkle
I find it hard to believe even at .040" in the hole with any flat top you are at only 8.6:1 with E6TE heads. Should be at least 9.5:1 likely a bit more. What model piston are you using and waht is the compression height?
Sealed Power H535CP
BDCV=1088 cc
TDCV=126 cc
 
Reply Like