Thread: 1955 f 250
View Single Post
  #1  
Old 05-03-2010, 06:08 PM
hoobatech's Avatar
hoobatech
hoobatech is offline
Freshman User
Join Date: Nov 2006
Posts: 37
Likes: 0
Received 0 Likes on 0 Posts
1955 f 250

I've been laid off from my job and decided to go back to college, so i need to part with some of my toys to pay for it all.
I have a 1955 Ford F-250 for sale locally for $1200, if someone on the boards wants it i'll sell it for $1000.
223 inline 6 manual trans 4 spd. dana rear end
-new gasket set
-new fuel pump
-new carb kit
-new plugs/cap/wires
-new harmonic balancer
-new belts
-new push rods
-head/valves redone and seats re-cut
-new thermostat and radiator hoses
-clutch adjusted
starts,runs,shifts fine
need brake lines and wheel cylinders up front to be able to drive.
the front end sheet metal is disassembled for bodywork, its going to need all the usual patches, but nothing big or too time consuming major areas being where the running boards meet the fenders and where the fender bolts onto the cowl. i bought it without an interior, but all the gauges/***** are there and work. it would be a fun project, but unfortunately im not going to have the means to work on it for a few years.
Thanks
Matt Huber
319-573-4595
Truck is located in Cedar Rapids, IA 52403


feel free to call me if you have any questions or send me a message here.