View Single Post
  #147  
Old 04-27-2010, 04:48 AM
hillclimbin hillclimbin is offline
New User
 
Join Date: Apr 2010
Posts: 24
hillclimbin is starting off with a positive reputation.
Well im trying to figure out why my truck wont engage in 4x4 either, already replaced one actuator on the pass side, because it was wasted, not sure about the driver side yet, im hoping its the solenoid or maybe a check valve? I put the truck on jackstands and when its in 4x4 the front cv shaft is spinning but the tires are not! When on the ground both cv shafts are fully locked,and when the engine is on they are free, does that mean my solenoid is good?
Reply With Quote