Originally Posted by Clay911
Where is everyone getting the Check valves from?? I have 2 different size ones and have to buy all the hoses for the entire system to get the check valves
Napa and all the parts stores only carry one check valve and its too small on one end.
Just wondering where I can buy the two sizes I need Thanks
Please see Post #20.
The sizes you nees are 1/8 x 1/8 standard check valves (x2) and 1/8 x 1/4 enlarging check valve (x1). Put them is your sample cart. (upper right of screen), provide a busniess name ( can be faked), and a reason for the samples, and they will send them to you FREE.... If you get reducing chack valves, the flow will be the wrong way, FYI
These are not the Droids you are looking for.....
2013 Ford Escape SEL 2.0L Ecoboost i4WD - Wifey's DD
2000 F250 SD XLT SC LB 4x4 PSD Ebony and Grey 297K, TS 6-pos Chip, 6637, CCV - my DD now.
1994 Ford Ranger XLT 113K 3.0L 2wd RC SB Son's first Truck
1999 Cheby S-10 - 4 banger, 5spd, 205k <--- Gave it away.. No more GM in my garage.