Thread: PATS No Start Condition - Help!
View Single Post
  #15  
Old 04-11-2010, 11:03 AM
lsrx101's Avatar
lsrx101
lsrx101 is offline
Fleet Mechanic
Join Date: Feb 2006
Location: Lorain County, Ohio
Posts: 1,776
Likes: 0
Received 5 Likes on 5 Posts
Originally Posted by ParisDakar
OK, after more reading, there seems to be another connector C269, a 16 pin square thing, that I should test for continuity between it and the PATS connector. Ugh, where is C269? My back and arms can't take much more of this working upside down and backwards up in the dash. .

AND I discovered the vehicle will let me reprogram my keys to a new PATS module myself, with some key on/key off sequences and a lot of waiting. Cha-ching! No dealer involvement! Now if I could just find the problem first!
Don't get too excited yet. To program new keys with that procedure, you need to have 2 programmed keys. If you have 2 "good" keys, you can program a third, fourth... If you only have one good key and need another, you still need a dealer or locksmith.
If you install a new PATS module, you'll need the dealer to set up the keys.
 
Reply Like