I did go back out and checked to see IF I had a test light and I did. So hooked it up to the coil, turned on key and hooked up a remote starter button and the test light did flicker. But when I took my thumbo off the remote button, the starter still kept turning, so I had to pull the battery cable again.

Also, I do not have the original 79 style ignition switch, but rather a universal ign/start switch, so there is no resister wire coming from it, so I have installed an external resistor between the Switch and the coil, for run mode as best as I could figure it out using a schematic I found in a Chiltons Manual.

I can put the NAPA brain box in for the 300 6 cyl., it has the "blue" chip where the wires come out. That is the correct one, right? Only if there is a problem that could destroy it, I don't want to yet.

CL NYE: You mean do the search on here for it? As I tried Google without much results.

Thanks,
jim.