My Tail light, Parking & Dash lights are not working right using the headlight switch. My headlights, brake & turn signals do work. I belive that the brake & turn signales work because they do not go through the headlight switch. Let me give brief history of this problem " Headlights work when pulling **** all the way out" running lights--(corner & tail lights & dash out)--all Inst.gauges work,but not Inst. lights. Parking lights do not work at all when pulling **** out to it's on position. If I pull **** out all the way then push in a little bit about half way between Parking & headlight position, I get everything working. I did replace headlight switch thinking my old one was bad but, the same thing is going on with the new one. Is this a problem anyone has had, Or what should I look for or do at this point to solve this issue. Thanks