Originally Posted by
hcbph
I picked up a used bed liner a few months ago. I had to slip the top of the liner under lip of the bed, once that happened, everything fit as it should including the cups for the hooks.
Good luck
I "thought" that I had everything tucked under correctly, and it all seemed to fit well. The top part of the bed closest to the cab was an initial concern, but the spray-in liner appeared to be pretty thin here ... it was a little too snug in this area though.
I'll admit that it may of helped if it was a warmer day, but gah ... these cups were a good 2-3" away from the bolt holes!