Originally Posted by
cheezit
sorry to be the one to tell you but there is no reason to remove the turbo to change the icp sensor on an 03/ early 04.
to remove them you go from under the truck and remove the heat sheild thats in front of the Y-pipe and its right there. ford pays .7 under warranty to r/i plus diag.
No problem on the Turbo...I planned on a EGR cooler delete.
(Just finished cutting the ends off the cooler to make blocker plates and fabing a new coolant bypass tube ).
Oil leak was the ICP. O-ring disintegrated!! Thanks to all of the advice.
As mentioned above, I will put a new oil cooler in while the top is off.
I will take 03-6L-X's advice and upgrade the oil drain tube.
Anything else I should consider while I'm laying on top of the motor?
Thanks again.